CLASSES
Click on one of the items below to see course descriptions, class schedules, and registration information.
Level 1: Machine Fundamentals
Machine Operation and Set-up Course
Who should attend?
This course is designed for operators who have little to no experience, or those who have learned the equipment via "word of mouth."
Duration: 2 days
Machines covered: GX-F series fiber lasers
Course description:
The Laser Machine Fundamentals course begins with an introduction to the various parts of the machine tool, head, and control. It is a "hands-on" course that will keep your personnel engaged and interested in the task at hand.
This course focuses on basic setup and operation. The student will be shown how to clean/replace the processing lens/window, how to properly center the nozzle, beam focusing (if applicable), and height calibration.
Students will be given time on the equipment to perform the above setup procedures. They then will have gained a basic understanding of the pertinent control features crucial to operation.
Control screen navigation and functions will be presented, followed by explanations of how the technology settings, feed rates, power settings, and cutter compensations affect the machining results. Basic G and M codes will be a part of this class, as well as restarting from specific locations in the program. They will also be shown how to save programs and use the system data input and output.
If time allow, at the end of the class, we will spend some time cutting different materials which will allow the student to implement some of their learning into a "real world" application.
Level 2: Optimization & Application Strategies
Advanced applications course
Who should attend?
This course is designed for operators who have either attended the Machine Fundamentals course or operated the equipment for at least six months.
Assuming that the attendee has previous equipment familiarity, there will be only a limited review of basic functions and controls. Operators must be comfortable setting up and operating the machine without the help of machine manuals or operation notes.
Duration: 2 days
Machines covered: GX-F series fiber lasers
Course description:
The Optimization & Application Strategies course begins with an introduction to the advanced NC features and functions of the controller that will help in part processing, cutting, and troubleshooting. Each student will review the proper methods of nozzle centering, beam focusing, and height calibration, as well as learn proper shortcuts and troubleshooting methods for setup problems. However, this class is truly designed to address the processing/setup/programming issues which are unique to what you do.
This course has no syllabus and is based upon your situation. If you have material(s) you are struggling with, part(s) you have difficulty processing, a programming strategy problem, a unique setup, or any other situation that needs to be addressed, then this course will be ideal.
The issues presented will be followed up by a demonstration and class lab that will include workpiece preparation fundamentals and will allow each student to use the advanced features of the machine and apply it to their unique situation.
Students will be given time on the equipment to perform the above setup procedures. They then will have the opportunity to cut several parts in varied thickness and complexity. During these labs, they will be shown how to diagnose the cut and make changes in the cutting condition. The student will be shown how different pierce routines and lead-in types can reduce processing time, as well as common programming strategies that can be implemented.
Students will be able to bring programs, drawing files, and examples of parts to discuss and develop real-world solutions with their fellow students and seasoned Application Engineers to problems that are plaguing your operation.
If you have any questions, please contact the Laser Customer Support Supervisor, Paul Wheeler at Paul.Wheeler@hrfjk.com.
Class | Location | Start Date | End Date | Availability | Register |
---|---|---|---|---|---|
Laser_Fiber GX-F Level 1 | Elk Grove Village, IL | 12/03/2024 | 12/04/2024 | Limited | Register |
Laser_Fiber GX-F Process Optimization - GXF - 9:30am-12pm | Richmond Hill, ONT | 12/05/2024 | 12/05/2024 | Full | |
Laser_Fiber GX-F Process Optimization - GXF - 1pm-3:30pm | Richmond Hill, ONT | 12/05/2024 | 12/05/2024 | Open | Register |
Laser_Fiber GX-F Level 2 | Concord, NC | 12/10/2024 | 12/11/2024 | Open | Register |
Laser_Fiber GX-F Level 1 | Concord, NC | 12/12/2024 | 12/13/2024 | Open | Register |
Laser_Fiber GX-F Level 1 | Elk Grove Village, IL | 12/17/2024 | 12/18/2024 | Limited | Register |
Can't find the training option you're looking for?
Please complete the form to register for your selected class.
MORE INFORMATION
Find local hotels closest to your training location, and book your reservations at special rates provided by MC Machinery Systems.
HOTELS NEAR OUR MAIN OFFICE (ELK GROVE VILLAGE, IL)
- Quality Inn (Schaumburg)
600 N. Martingale Road, Schaumburg, IL 60173
P: (847) 517-7737Reservations
You MUST ask for the Mitsubishi/MC Machinery special room rate. The standard rate is $82.00/night. - Holiday Inn Express Arlington Heights
2111 South Arlington Heights Road, Arlington Heights, IL 60005
P: (847) 956-1400Reservations
To ensure the Mitsubishi/MC Machinery preferred rate of $82.00, please inform the staff at check-in that you are here for an operation training class. - Sheraton Suites Chicago Elk Grove
121 Northwest Point Blvd, Arlington Heights, IL 60007
P: (847) 290-1600Reservations
To ensure the Mitsubishi/MC Machinery preferred rate of $99.00, please inform the staff at check-in that you are here for an operation training class. - Country Inn & Suites by Radisson
1160 W Devon Ave Elk Grove Village, IL 60007
P: (847) 985-0101
F: (847) 985-0202
Reservations
To ensure the Mitsubishi/MC Machinery preferred rate of $99.00, please inform the staff at check-in that you are here for an operation training class.
HOTELS NEAR THE EAST COAST TECHNOLOGY CENTER (PINE BROOK, NJ)
- HOLIDAY INN (PARSIPPANY)
707 Route 46, Parsippany, NJ 07054
P: (847) 437-6010Reservations
In order to get the special rate, enter Mitsubishi corporate ID #000516821. - HAMPTON INN AND SUITES (PARSIPPANY/NORTH)
3737 Route 46 East, Parsippany, NJ 07054
P: (847) 437-6010
HOTELS NEAR THE WESTCOAST TECHNOLOGY CENTER (CYPRESS, CA)
- HYATT HOUSE CYPRESS/ANAHEIM
5905 Corporate Ave. Cypress, CA 90630
P: (714) 828-4000
F: (714) 229-0566Reservations
Register online using Mitsubishi corporate code “MCM,” or call directly and ask for the MC Machinery/Mitsubishi rate.
HOTELS NEAR THE SOUTHEAST TECHNOLOGY CENTER (CONCORD, NC)
- SPRINGHILL SUITES MARRIOT
7811 Gateway Lane NW, Concord, NC 28027
P: (704) 979-2500Reservations
Click here to book your group/corporate rate | Marriott International - Hampton Inn & Suites Concord Charlotte
9850 Weddington Rd, Concord, NC 28027
P: (704) 979-5600Reservations
Click here to book your group/corporate rate | Hampton Inn & Suites
HOTELS NEAR MC MACHINERY CANADA
- HILTON GARDEN INN
300 Commerce Valley Drive East
Markham, ONL3T7X3
Canada
P: (905) 709-8008Reservations
In order to get the special room rate of $109 per night without breakfast, enter corporate account #N0514136.In order to get the special room rate of $115 per night with breakfast, enter corporate account #N2648918.
Travel Disclaimer
It is important to MC Machinery that all of our guests have a problem-free experience when visiting us. Please speak to your instructor, a member of our administrative staff, or your hotel front desk clerks if you are experiencing problems, and we will aim to resolve any issue promptly. Times for all Elk Grove Village, Illinois, training courses start at 9:00 AM and end anywhere from 4-5:00 PM CST. For your convenience, the main building front doors on the east side will unlock at 8:30 AM. When you arrive, please wait in the front lobby until your instructor is available to take you to your classroom. Daily hotel transportation pickup and drop-off will match training start and end times.
Start times for all classes begin at 9:00 AM at 85 Northwest Point Blvd.,Elk Grove Village, Illinois 60007. Upon arrival, please use the main entrance and check in at the front desk.Please wait in the front lobby until your instructor is available to take you to your classroom. The class end times will be approximately 5:00 PM. Start times at our other facilities is generally around the same time (9:00 AM). You will be using the main facility unless otherwise noted in your confirmation documentation.
Note 1: To be fair to all of our customers, we will only guarantee two seats from any one company per class. If you would like to send more students, please contact the training schedulers at 630-616-7701 to start a separate waiting list for the class. On the Wednesday of the week before the class, if there are any openings left, we will open the seating and contact companies based upon the earliest request for the spot.
Note 2: Unless otherwise stated in writing on the sales contract, training is provided free of charge to our customers under the original manufacturer’s warranty period only. This does not apply to extended service warranties past that date. No class credit will be retained if your company elects not to send students during the warranty period. For all other situations, there is a minimal charge per student. If you are a Triple Diamond member, there are discounts applied.
Note 3: Under the 1994 Workforce Investment Act (WIA),your state, in cooperation with the federal government, can provide grants to offset completely the charges noted above. The grants do not cover transportation costs. For more information, contact our scheduling staff.
Note 4: All classroom training is subject to equipment availability. Guarantees offered as a condition of sale DO NOT supersede this. Older models will gradually be replaced at our training centers, which will restrict and eventually eliminate classroom training for that specific machine model. Usually, this occurs around a year after that model is no longer being manufactured, in order to make room so we can train on the current machines being sold. After this time, training can still be done at your facility, but there is a charge for this. Classes are deliberately held to a specific student number that allows maximum “hands-on” time.
Note 5: Sometimes, it is necessary to reschedule or cancel classes. We try our best to avoid this, but in the course of business, this situation can occur. MC Machinery reserves the right to cancel classes up to a week before the scheduled date, without liability. It is therefore strongly recommended that customers refrain from the purchase of “non-refundable” airline tickets. If your class is canceled, we will work with you on rescheduling, and your students will be given priority for the next class.
The following terms and conditions apply to all training sessions conducted by MC Machinery Systems, Inc., here with known as MMS. Any additional or different terms or conditions shall not be deemed in effect unless previously agreed to in writing by authorized agents of MMS. Any attempt to substitute, modify, or add different terms are here by expressly rejected and shall be of no force or effect. Class attendance will be limited to machine and/or instructor availability.
APPLICABLE LAW
The state of Illinois, USA, shall govern the validity, performance, and construction of any contract entered into between MC Machinery Systems, Inc.,and Purchaser. When a company sends a student to our class, it is assumed that a verbal contract is in force between that company and MC Machinery Systems, with agreement of all conditions contained in this document.
COURSE REGISTRATION
Class attendance is open to any individual over 18 years of age who has a desire to learn the operation and optimization of products sold by MC Machinery Systems, Inc. This applies as long as they do not work for any competing product line or intend to provide alternative services in direct competition to MMS. Registration of all of our technical courses can be done through any of the following methods:
- Call our central facility at 630-616-5900 and listen to the electronic menu. As soon as the recording starts, push “4” on your keypad. Our friendly, attentive support staff will take your company information and be able to offer you a selection of classes. They will be able to assist you in the registration process.
- 24 hours a day,you can see our scheduling calendar, book hotels, and register for a class online at the MC Machinery website by visiting this address:http://7c3f.hrfjk.com/training/current-class-schedule/. Once your information is in our system, we will follow up with an email confirmation. If, for whatever reason, the class is not available,we will assist you in alternative scheduling.
COURSE CONTENT
It should be noted that class content has changed significantly to provide a richer, more in-depth experience for the user. The old Basic, Intermediate, and Advance class subject matters have been extensively reviewed and refined. In the new Machine Fundamentals(or Level 1) classes, the primary emphasis now is on machine fundamentals. The functions and operation of the control, how to setup a job, and an introduction to programming are the primary subjects. In the new Level 2 course,the content mainly deals with optimizing processes and will look more at the applications used on the machine.
As noted in the various class syllabuses, attendance in the Optimization& Application Strategies(or Level 2) course assumes that the user has a good grasp of the use of the machine, obtained through having received Level 1 course instruction and/or extensive actual use of the equipment. Customers should not assume that the Level 2 course would cover the topics presented in the Level 1 course. Please see the individual course description for entry requirements.
TRAINING RESCHEDULING OR CANCELLATION
MC Machinery reserves the right to reschedule, cancel, or delay training if attendance does not meet a minimum level, or for other circumstances beyond its control. Notification of cancellation by MMS will be given not later than 14 days before the scheduled class start. Because of this potential,it is strongly suggested that students not use non-refundable tickets for travel.
Rescheduling by the customer is done at no charge if MMS is notified with a minimum of 14 days’ notice. Rescheduling after that point is subject to a fee equal to 30% of the course tuition if received at any period less than two weeks but more than 72 hours. Cancellation within 72 hours of class start date or failure to notify cancellation or attend class without prior notice will result in a forfeiture of all fees, in the case of paid customers. In the case of customers under the warranty period, non-attendance or cancellation without prior notice may void their right to future free instruction.
CERTIFICATES
Certificates will only be given out upon completion of the entire class. Students who do not complete will be given an attendance record, upon request, to deliver to their companies. This applies to late arrivals of more than two hours on the first day and early departures on the last day of class.
DRUG-FREE WORKPLACE
It is the policy of MMS that the use, sale, transfer, or possession of alcohol or illegal drugs while on the company premises, or in any private vehicle parked on MC Machinery Systems, Inc.’s property,is expressly prohibited. In addition, MMS reserves the right to refuse instruction to students attending any training session or operating any equipment while under the influence of drugs or alcohol.
If a condition exists where a student is on doctor-prescribed medication during the period of class attendance, it is required that the instructor be informed immediately.Conditions where the students are pregnant, susceptible to allergic reaction, or prone to dizziness, fainting,or seizure may impact or restrict non-classroom (lab) activities at the discretion of the instructor. Prior notification is requested. If MMS determines that an individual is attending a training session while under the influence of drugs or alcohol, they will be asked to leave that session immediately. The operator may be allowed back into class the following day if their company contacts us before the return.
Note: MMS will have no fixed responsibility to go back over material covered during the student’s absence because of this issue.
CONDUCT
In order to provide the best learning conditions, students are requested to maintain a positive, attentive demeanor while receiving instruction. This applies to their interactions with fellow students and the class instructor while on MMS property. Sleeping in class or other disruptive, lewd, or aggressive behavior will not be tolerated and will result in the student being asked to leave the building immediately. If this is necessary, all paid fees will be forfeited, and their company will be immediately contacted.
COMMUNICATIONS FOR THE STUDENT
Cell phones and pagers should be turned off during class. If an emergency occurs and it is necessary to contact the student, please call our office at 630-616-5900, and we will immediately pull that student from class to return the call. In cases where a student must return home for a legitimate reason, they will be allowed to attend another class. Fees accrued will be applied toward that alternative class as long as less than 50% of instruction has occurred. Outgoing calls using MMS phones should use credit cards or be made collect.
ATTIRE
At MMS, business casual attire is requested at all training sessions. No public nudity, shorts, sleeveless shirts, tank tops, torn or ripped clothing, swimwear, pajamas, shirts with offensive slogans or logos, open-toed shoes,or sandals will be permitted in any training environment. Students arriving at class dressed inappropriately will be asked to leave that session and not return until they have changed.
SMOKING ON PREMISES
Smoking is prohibited inside any MMS facility at all times. Designated outside smoking areas will be defined during the initial class orientation for use before or after class and during set break times.
PRICING AND TERMS OF PAYMENT
Payment for Training: Where payment is required to attend our instruction, all fees need to be resolved and are due prior to the first day of class commencement or on-site visit. If MMS has not received payment or a valid purchase order prior to that point, we reserve the right to refuse or deny entry into class and the student will be asked to leave. Under special circumstances, last-minute payment by credit card and/or certified check will be considered.The prices specified for any classroom or on-site training session are valid for 60 days. There after, such prices are subject to change, without notice, to prices in effect at the time of purchase order acceptance. All costs are quoted in U.S.dollars.
PRICING OF TRAINING ACTIVITIES
Classroom training costs vary upon the situation. Level 1 and 2 classroom training at one of our facilities is free for up to a maximum of three students per visit, at any time during the warranty of your EDM. For customers out of warranty or who purchase used late-model machines where we still offer formal classroom instruction, please contact the training scheduler at 630-616-5900 for rates and availability. Specialized two-day classes are offered on a random basis. These classes may require a fee to attend. Again, contact the training scheduler for rates and availability.
Note: The customer will assume any travel or hotel expenses. In most cases,we have agreements with specific local hotels to provide transportation to and from the airport and between our facility and the hotel. A lunch is provided daily at no cost.
ON-SITE TRAINING
Paid on-site training will not occur unless charge issues are resolved prior to the first visit date. In order to minimize costs to customers, it is a standard practice to book lower-priced, non-refundable airfare tickets. Once the ticket has been issued, if a trip cancellation occurs by customer request, they will be liable for the costs of said ticket.Some costs are estimated (such as travel hours) and will vary in hourly charges based upon the age of the machine. Please contact the Service Customer Support Manager at 630-616-5900. Quote estimates can be provided upon request.